Chainsaw is just like any other tool which needs to be handled with a lot of care. It makes the task of felling trees much easier and that calls for skilled tree cutters. A chainsaw can pose danger when not handled with correctly, or if it happens to be poorly maintained. A number of accidents have been attributed to chainsaws where they have been used to fell trees and that means it can be a lethal weapon. There are however safety guidelines that should be put into action whenever chainsaws are involved. The right equipment and protective clothing are also things that should be considered in felling trees processes and measures to protect others who are not involved in the process.
It is important to read the instructional manual if you happen to buy a new chainsaw so that you may know what is expected of you in terms of handling the tool. Familiarize yourself with the equipment if you have never used it before you embark on any serious tree felling work. More of felling trees techniques and guidelines both for professionals and nonprofessional chainsaw user information can however be found at chainsawgeek.com website. Instructional manuals should however not be done away with after going through them, because at times things tend to be forgotten and its therefore advisable if they are kept for future reference.
Chainsaws come in mainly three types;
- Electric Powered chainsaws. These types of chainsaws are generally inexpensive and less powerful basically because there is no engine to maintain. It comes with an extension cord, makes less noise and vibration, and easy to maintain.
- Petrol Chainsaws. They come in a wide range of engine and bar sizes. These kinds of chainsaws can be used anywhere because they use fuel and they can be refueled any time. They are however noisy and smoky and hard to start especially if they are not well maintained or regularly used.
- Top handle chainsaws. These chainsaws are only used by trained arborists who work on top of trees and their rear top handle is usually placed over the engine.
Types of Tree Cuts
- Felling cut. This involves cutting of a tree stem or a branch and making it fall in the right direction
- Horizontal bore cut. This is done by placing the chainsaw on its sideways position and using its tip to cut into a tree or a log for that matter.
- This involves the cutting of branches from the stem of a tree.
Do’s and Don’ts of Chainsaw Handling
- A chainsaw should not be operated above shoulder height or above ground level unless it’s qualified and skilled cutter doing the same.
- Never work alone when it comes to felling trees. Always have someone with you at a distance.
- Do not engage a chainsaw under alcohol or drugs influence.
- It is also not a good idea to operate your chainsaw when you are fatigued because you need to be alert and in control during the whole process.
- Do not use the chainsaw for any other activity aside from the one it is intended to carry out, cutting trees and not just any other activity.
- Use big chainsaws for big trees and small chainsaws for small trees. That is to say always match your chainsaws with the size of tree that is being felled.
Understanding Your Chainsaw Parts Better
All modern chainsaws are designed in such a way that you can easily control it and minimize chances of accidents occurrences. It is therefore important to know how each part of a chainsaw works but that does not mean that it guarantees you training and experience. Knowing different parts of a car does not automatically make you a qualified driver, does it?
- Safety mitt. The sole purpose of this is to provide protection for your hand hence it is usually attached to the front handle, and is enabled to rotate to help keep your left hand on the handle just in case a chainsaw kickback happens. It is therefore important to ensure that your thumb is firmly wrapped around the front handle whenever you are handling a chainsaw.
- Front handle guard. It prevents the left hand from touching the chain if it happens to slip off the front handle.
- This stops the moving chain whenever the front handle guard is moved forward; it is usually activated when the saw rotates in a kickback scenario leaving the right hand swiveling on the front handle contacting the front guard.
- Inertia Chainbrake. This can trigger the brake in any position in an event of a kickback especially when using the chainsaw with the guiding bar in a parallel position while cutting or trimming a tree.
- Throttle control lockout. It prevents accidental opening of the throttle by being locked in an idle place when the lockout is not pushed by the right hand holding the back handle.
- Rear hand guard. As the lowest part of the rear handle, it protects your hand in the event of chain breakage.
- Chain container. This catches broken or jumping chain.
- Bar and chain combination. The correct use of this combination is supposed to reduce kickback occurrence likelihood. The motor unit and the size of the tree being cut should determine the length of the bar.
- A muffler directs gases away therefore helping decrease noise levels from the chainsaw engine.
When maintaining and servicing chain saws bear the following in mind;
- Always follow the manufacturer’s instructions as stipulated in the operator’s manual when it comes to maintaining and repairing your chainsaw.
- Do not go ahead to fell trees with a damaged chainsaw. Always have a chainsaw repaired according to specifications given by the manufacturer.
- Use spare or replacement parts only intended for that particular chainsaw.
- Before making any changes or maintenance adjustments, make sure the engine is turned off.
- Have your chainsaw repaired by a trusted and qualified personnel in case you are not able to do it yourself by the help of the operator’s manual.
- Drain gas or fuel appropriately before storing it in instances where it is not to be used for a certain period of time.
Look for more on chainsaws information on chainsawgeek.com.